Ir para o conteúdo principal

Alterações no passo #2

Edição por Dennis Jengo

Edição recusada por David Hodson

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove the following two screws:
- [* red] One 1.2 mm Phillips
- [* orange] One 1.6 mm Phillips
+ [* red] One 1.2 mm Phillips*** screw #4***
+ [* orange] One 1.6 mm Phillips*** screw #5***
[* black] Remove the thin steel dock connector cable cover from the iPhone.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the dock connector cable cover with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.