Ir para o conteúdo principal

Alterações no passo #2

Edição por Dennis Jengo

Edição recusada por David Hodson

Sem alteração

Linhas de Passo

-[* black] Remove the following two screws:
+[* black] Remove the following two screws: *** screws #4,5***
[* red] One 1.2 mm Phillips
[* orange] One 1.6 mm Phillips
[* black] Remove the thin steel dock connector cable cover from the iPhone.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the dock connector cable cover with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.