Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the clear plastic pull tab to gently lift the battery out of the iPhone.
[* icon_caution] Do not remove the plastic tab from the iPhone.
[* icon_note] You may need to use a plastic opening tool to loosen the adhesive under the battery.
[* red] Remove the contact clip from the iPhone.
[* blackicon_reminder] Before reconnecting the battery connector, be sure the pressure contact clip (shown in red) is properly positioned next to the battery connector.
[* icon_note

[* icon_reminder
] Before reassembly, be sure to clean all metal-to-metal contact points on the pressure contact as well as its contact point on the rear panel with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.
[* blackicon_reminder] Before reconnecting the battery connector, be sure the pressure contact clip (shown in red) is properly positioned next to the battery connector.
[* icon_note

[* icon_reminder
] Before reassembly, be sure to clean all metal-to-metal contact points on the pressure contact as well as its contact point on the rear panel with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.