Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por av8or2

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board. My 4s has two screws one of which holds down the contact pad which is located above the screw indicated in red in the photo.
[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board. My 4s has two screws one of which holds down the contact pad which is located above the screw indicated in red in the photo.