Ir para o conteúdo principal

Alterações no passo #6

Edição por David Hodson

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Once the top of the LCD has cleared the bottom edge of the outer case, remove the logic board assembly from the body of the iPod.
-[* icon_note] Again, be sure to mind the hold switch, that it doesn't catch on the bottom of the click wheel hole.
+[* icon_note] Again, be sure to mind the hold switch plate, that it doesn't catch on the bottom of the click wheel hole.