Ir para o conteúdo principal

Alterações no passo #5

Edição por David Hodson

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Continue to push the logic board assembly through the outer case of the iPod.
-[* icon_note] Tolerances inside the Nano are extremely tight. Be very patient when removing the logic board assembly, and make sure no components get stuck on the case.
+[* black] Continue to push the logic board assembly through the outer case of the iPod with a spudger.
+[* icon_note] Tolerances inside the Nano are extremely tight. Be very patient when removing the logic board assembly, and make sure no components get caught on the case.