Ir para o conteúdo principal

Alterações no passo #4

Edição por Brett Hartt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Once the retainer has been pushed past its hole in the outer case, the first spudger is no longer necessary to remove the logic board.
-[* black] When removing the logic board assembly, use gentle, but steady force as you press on the top of the LCD.
-[* icon_note] Constantly mind the hold button ribbon, making sure it doesn't snag on an edge and tear.
+[* icon_note] Once the retainer has been pushed past its hole in the outer case, the spudger used to depress it is no longer necessary.
+[* black] Using gentle but steady force, push on the top of the LCD to slide the logic board assembly out of the bottom of the iPod.
+[* icon_note] Constantly mind the hold button, making sure it doesn't snag on an edge and tear the ribbon cable.