Ir para o conteúdo principal

Alterações no passo #1

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use a heat gun to soften the adhesive underneath the camera/microphone cover.
[* black] Pry the camera/microphone cover off the case with a metal spudger and remove it.
-[* icon_note] It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.
+[* icon_caution] It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.
+[* icon_note] You can try this alternative method for removing the cover:
+ [* black] Use a hot glue gun to apply a bead of glue across the cover.
+ [* black] Move the nozzle in the glue for 20 seconds to heat the lens adhesive holding the lens in place.
+ [* black] Press a spudger into the hot glue and hold it in place until the glue cools and hardens.
+ [* black] Pull on the spudger with firm steady force, while using a fingernail to pry on the cover edge.