Ir para o conteúdo principal

Alterações no passo #1

Edição por Leii Lo

Edição recusada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use a heat gun to soften the adhesive underneath the camera/microphone cover.
[* black] Pry the camera/microphone cover off the case with a metal spudger and remove it.
-[* icon_note] It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.
+[* icon_note] NOTICE: Please follow the two following steps before this one to avoid permanently damaging your iPod.