Ir para o conteúdo principal

Alterações no passo #6

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Release the tabs on each side of the RAM chip by simultaneously pushing each tab away from the RAM.
[* icon_note] These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
[* black] After the RAM chip has popped up, pull it straight out of its socket.
[* icon_reminder] Repeat this process if a second RAM chip is installed.
[* black] Logic board remains.
[* black] If you need to mount the heat sink back onto the logic board, we have a [guide|744|thermal paste guide] that makes replacing the thermal compound easy.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado