Ir para o conteúdo principal

Alterações no passo #3

Edição por Christopher Collazo

Edição aprovada por Christopher Collazo

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] insert spudger behind the face plate on both sides and pry it out.
-[* black] Next, insert the spudger again directly under the shelf below the lens between the shell and the plastic tabs next to it and pry.
-[* black] pull off the face plate.
+[* black] Insert your spudger behind the upper face plate (red) on both sides and pry loose.
+[* black] Next, insert the spudger between the rear case and the plastic tabs directly under the shelf (orange) and pry loose.
+[* black] Pull off the face plate.