Alterações no passo nº 4
Linhas do passo
| [title] Remove antenna and disconnect the PCB board | |
| [* black] Remove the two screws at the bottom right corner of the front panel using a Phillips head screwdriver, as shown in the image. | |
| [* red] Two 3.35mm Philips head screws | |
| - | [* orange] Use tweezers to disconnect the antenna from the logic board to the PCB board. |
| + | [* orange] Use [product|IF145-020|tweezers] to disconnect the antenna from the logic board to the PCB board. |
| [* black] Remove the tape connected to the motherboard. |