Histórico do passo nº 4 do guia HTC One X Motherboard Replacement

Alterações no passo nº 4

Edição por Liam — 17 de nov de 2014

Edição aprovada por Liam

	[title] Remove antenna and disconnect the PCB board
-	[* black] Remove the two screws~~, using a Phillip's head screwdriver,~~ at the bottom right corner of the front panel as shown in the image.
+	[* black] Remove the two screws at the bottom right corner of the front panel using a Phillips head screwdriver, as shown in the image.
	[* red] Two 3.35mm Philip Screws
	[* orange] Use tweezers to disconnect the antenna from the logic board to the PCB board.
	[* black] Remove the tape connected on the logic board.