Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #15

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 1.9 mm Phillips screws
[* orange] One 2.3 mm standoff screw
[*[* icon_note] UseStandoff screws are best removed with a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver to remove these standoff screws.
[* icon_reminder] During reassembly, you
can also do the job—but use the tip of a spudgerextra caution to get the standoff screw startedensure it doesn't slip and damage surrounding components.
[*[* icon_note] UseStandoff screws are best removed with a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver to remove these standoff screws.
[* icon_reminder] During reassembly, you
can also do the job—but use the tip of a spudgerextra caution to get the standoff screw startedensure it doesn't slip and damage surrounding components.