Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Lift and remove the Lightning connector and headphone jack cable out of the iPhone.
[* icon_reminder] Before installing or replacing the Lightning connector assembly:
[* black] Use a plastic tool to scour any bits of adhesive residue from the rear case behind the cable.
[* black] Compare your replacement part to the original and note any differences. You may find a rubber gasket adhered to the old headphone jack, which should be transferred to the new part if needed.
[* black] Test fit your replacement part, and then peel off any protective plastic films or liners before installing.