Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use an opening pick to slowly separate the Lightning connector and headphone jack cable from the rear case.
[* black] Additionaly applying a soft hot air gun helps glue releases making smothness [* icon_note] If the adhesive feels hard to slice, apply additional heat and faster of the par disassemblytry again.
[* black] Additionaly applying a soft hot air gun helps glue releases making smothness [* icon_note] If the adhesive feels hard to slice, apply additional heat and faster of the par disassemblytry again.
[* icon_note] Carefully work the pick down the right side of the Lightning connector and headphone jack cable, making sure to '''stop''' right as you hit the bottom.