Ir para o conteúdo principal

Alterações no passo #5

Edição por dentondon

Edição recusada por Brett Hartt

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Remove the following three Phillips screws securing the optical drive to the upper case:
+[* black] Remove the following three Phillips screws (using the #000 Phillips bit) securing the optical drive to the upper case:
[* red] One 4.5 mm Phillips screw securing the optical drive bracket to the upper case near the fan.
[* orange] Two 2.5 mm Phillips screws securing the optical drive to the upper case near the optical drive opening.
+[* icon_note] It is ''possible'' to remove the screws using a #00 Phillips bit, but in some cases might result in stripping the screws if they are seated firmly enough.