Pular para o conteúdo principal

Alterações no passo #1

Edição por David Hodson

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Disconnect the speaker cable from its socket on the speaker board prying straight up from the board withUse a spudger.
[* black] Disconnect
spudger to pry the speaker cable from its socket onconnectors off of the logic board as done aboveand the speaker board.
[* red] Remove the speaker cable by pulling it horizontally out of the metal clips holding it inalong the side of the front case.
[* black] Disconnect the speaker cable from its socket on the speaker board prying straight up from the board withUse a spudger.
[* black] Disconnect
spudger to pry the speaker cable from its socket onconnectors off of the logic board as done aboveand the speaker board.
[* red] Remove the speaker cable by pulling it horizontally out of the metal clips holding it inalong the side of the front case.