Pular para o conteúdo principal

Alterações no passo #8

Edição por Brett Hartt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Releaseblack] With the plastic tab holdingspudger still between the rear case toand front case, slide the logic board screwspudger along the right edge of the device, moving toward the bottom, prying as you go.
[* black] LiftContinue prying along the rear case offbottom edge of the device from right to left, freeing it from the devicefront panel.
[* red] Releaseblack] With the plastic tab holdingspudger still between the rear case toand front case, slide the logic board screwspudger along the right edge of the device, moving toward the bottom, prying as you go.
[* black] LiftContinue prying along the rear case offbottom edge of the device from right to left, freeing it from the devicefront panel.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão