Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #8

Edição por David Hodson

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* blackorange] Insert a spudger between the back and front casingcase of the display assembly.
[* black] Using the spudger,
assembly, and peel the two ribbon cables off the two adhesive pads along the back casingcase of the display assembly.
[* icon_notered] The second picture shows the location of the pads on the back casingcase is shown. The top left corner of the case is the corner of the phone shown in the first picture.
[* blackorange] Insert a spudger between the back and front casingcase of the display assembly.
[* black] Using the spudger,
assembly, and peel the two ribbon cables off the two adhesive pads along the back casingcase of the display assembly.
[* icon_notered] The second picture shows the location of the pads on the back casingcase is shown. The top left corner of the case is the corner of the phone shown in the first picture.

Imagem 1

Versão Antiga

Nova Versão