Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #8

Edição por Matthew Newsom

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Slide the phone into the "closed" position.
[* black] Insert a spudger between the back and front casing of the display assembly.
[* icon_caution] There is ablack] Using the spudger, peel the two ribbon cable attached withcables off the two adhesive topads along the top sideback casing of the display assembly. Be careful not to tear it as you detach it with
[* icon_note] The second picture shows the location of the pads on the back casing. The top left corner is the corner shown in
the spudgerfirst picture.
[* icon_caution] There is ablack] Using the spudger, peel the two ribbon cable attached withcables off the two adhesive topads along the top sideback casing of the display assembly. Be careful not to tear it as you detach it with
[* icon_note] The second picture shows the location of the pads on the back casing. The top left corner is the corner shown in
the spudgerfirst picture.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão