Ir para o conteúdo principal

Alterações no passo #9

Edição por Walter Galan

Edição aprovada por Walter Galan

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Tilt the top of the logic board away from the rear enclosure.
[* black] Lift the logic board straight up and out of the iMac.
-[* icon_caution] Be careful not to snag the board on any of the rear case's screw posts.
+[* icon_caution] Be careful ***not*** to snag the board on any of the rear case's screw posts.
[* icon_note] The I/O boards at the bottom of the logic board will be the greatest challenge. It is recommended to pull gently to avoid any damage.