Pular para o conteúdo principal

Alterações no passo #2

Edição por Brian Boudreau

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00.
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] WhenI found that the image is incorrect on this step. The 3 mm screw is in the center. When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.
[* icon_reminder] WhenI found that the image is incorrect on this step. The 3 mm screw is in the center. When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.