Pular para o conteúdo principal

Alterações no passo #2

Edição por filchambers

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] TwoOne 3 mm Phillips #000.
[* orange] OneTwo 4 mm Phillips #000 on the right side.
[* black] Photo is slightly incorrectly labeled, the 3mm screw is in the centre and there are 2x 4mm screws on the outside.
[* red] TwoOne 3 mm Phillips #000.
[* orange] OneTwo 4 mm Phillips #000 on the right side.
[* black] Photo is slightly incorrectly labeled, the 3mm screw is in the centre and there are 2x 4mm screws on the outside.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.