Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por oldturkey03 —

Edição aprovada por oldturkey03

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Once all the contacts are desoldered, the old joystick can be removed.
[* black] Check that all the holes are cleared of old solder. Hypodermic needles as well as very small drill bits can be used to clear the holes.
[* black] Insert wisdom herethe new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board.
[* black] Once all the contacts are desoldered, the old joystick can be removed.
[* black] Check that all the holes are cleared of old solder. Hypodermic needles as well as very small drill bits can be used to clear the holes.
[* black] Insert wisdom herethe new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board.