Ir para o conteúdo principal

Alterações no passo #2

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Sem alteração

Linhas de Passo

[* black] Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board.
[* icon_reminder] The three cables are coded with black sleeves of different lengths. During reassembly:
[* black] Connect the long-sleeved cable to the center socket.
[* black] The short-sleeved cable connects next to the screw.
[* black] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.