Pular para o conteúdo principal

Alterações no passo #1

Edição por John Williams

Edição aprovada por John Williams

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Was surprised when I used aOnce the motherboard is out of the way, take your plastic spudger and apply gentle pressure to gently push on the undersideback of the lcd. It should pop free at one corner allowing you to work your opening tool between the display assembly, and it popped free on the other side. (No Heat Applied)frame.
[* black] Note the presence of'''NOTE''' I did not require any heat for this particular task, however that does not mean heat will not be necessary.
[* black] '''NOTE''' Be careful not to tear
the double sided black adhesive ring on the watchdisplay.
[* black] Was surprised when I used aOnce the motherboard is out of the way, take your plastic spudger and apply gentle pressure to gently push on the undersideback of the lcd. It should pop free at one corner allowing you to work your opening tool between the display assembly, and it popped free on the other side. (No Heat Applied)frame.
[* black] Note the presence of'''NOTE''' I did not require any heat for this particular task, however that does not mean heat will not be necessary.
[* black] '''NOTE''' Be careful not to tear
the double sided black adhesive ring on the watchdisplay.