Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações neste passo

Edição por rousp

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Place the unit bottom up on a table. Use a cloth or similar to protect it from scratches.
[* black] Using a heat gun, hair dryer or similar heat up the dust cover in order to weaken the tapeadhesive that holds it in place.
[* black] Using a heat gun, hair dryer or similar heat up the dust cover in order to weaken the tapeadhesive that holds it in place.
[* black] Start in a corner, it can be tricky to get a hold of it at first.
[* black] Progress slowly, but don't over heat the unit. You will tear off some of the tape. But progresstape, don't worry too much about that. Progress slowly and be patient and you will succeed.
[* black] Progress slowly, but don't over heat the unit. You will tear off some of the tape. But progresstape, don't worry too much about that. Progress slowly and be patient and you will succeed.