Ir para o conteúdo principal

Alterações no passo #8

Edição por Walter Galan

Edição aprovada por Walter Galan

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Use the flat end of a spudger to separate the trackpad ribbon cable from the adhesive securing it to the upper case just before the hole where it passes through to the trackpad.
+[* black] Wedge the flat end of a spudger underneath the upper case opening where the trackpad ribbon cable passes is routed through.
+[* black] Gently pry the trackpad ribbon cable from the adhesive securing it to the upper case.