Ir para o conteúdo principal

Alterações no passo #7

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Pull the trackpad ribbon cable straight out of its socket on the logic board.
-[* black] Insert a spudger under the trackpad ribbon cable where it enters the hole in the case to free it from adhesive.
+[* black] Use the flat end of a spudger to separate the trackpad ribbon cable from the adhesive securing it to the upper case just before the hole where it passes through to the trackpad.