Ir para o conteúdo principal

Alterações no passo #15

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

-[* icon_note] By this point, the outer cells should be free, and you should only have to apply significant prying force on the two center cells. If this is not the case, go back and completely loosen the four outer-most cells from the upper case.
+[* icon_note] By this point, the outer cells should be free, and you should only encounter resistance from the two center cells. If this is not the case, go back and completely loosen the four outer-most cells from the upper case.
[* black] Pry up on the two center cells to separate the last of the adhesive and remove the battery from the device.