Ir para o conteúdo principal

Alterações no passo #7

Edição por Jonathan Nooning

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two.
-[* icon_caution] Throughout this procedure, be careful not to damage the any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.
+[* icon_caution] Throughout this procedure, be careful not to damage any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.
[* black] When using the hot iOpener method, if you encounter significant resistance to prying, stop and use the iOpener to reheat the section you're working on.