Ir para o conteúdo principal

Alterações no passo #6

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Sem alteração

Linhas de Passo

-[* black] heat an iopener and do the thing.
+[* icon_note] Throughout this procedure, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point.
+[* black] Use the hot iOpener to cover half of the two right-most battery cells.
+[* black] After about a minute, reheat the iOpener and move it to cover the other half of the right-most battery cells.