Ir para o conteúdo principal

Alterações no passo #6

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

-[* icon_note] If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point.
+[* icon_note] If you don't have a liquid adhesive remover, you'll be using a [guide|25705|hot iOpener|new_window=true] to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point.
[* black] Use the hot iOpener to cover half of the two right-most battery cells.
[* black] After about a minute, reheat the iOpener and move it to cover the other half of the right-most battery cells.