Ir para o conteúdo principal

Alterações no passo #5

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Apply a small amount of adhesive remover (approximately 1 ml) evenly under the edge of the rightmost battery cell.
+[* black] Apply a few drops of adhesive remover evenly under the edge of the rightmost battery cell.
+ [* icon_note] You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.
[* black] Wait 2-3 minutes for the liquid adhesive remover to penetrate underneath the battery cell before you proceed to the next step.
-[* icon_caution] Do not apply more than 1 ml of the adhesive remover at a time. Using too much can allow the adhesive remover to make its way to the backside of your keyboard and potentially damage it.
+[* icon_caution] Use more adhesive remover if needed, but do not apply more than a few drops at a time. Using too much can allow the adhesive remover to make its way to the backside of your keyboard and potentially damage it.

Imagem 1

Versão Antiga

Nova Versão