Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Robbie

Edição aprovada por Robbie

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Undo the 52 Phillips screws showncircled in red and detach the battery connector (so we don't short anything out)
[* black] Undo the 3 screws holding down the bottom of the logic board and charger port circled in green

[* black] Undo the flex cables and speaker power cable circled in greenblue and lift the usb charging boardcharger port out
[* icon_caution] The flex cable for this board and the one next to it for the screen their locking tabs open from the back
[* black] Undo the 52 Phillips screws showncircled in red and detach the battery connector (so we don't short anything out)
[* black] Undo the 3 screws holding down the bottom of the logic board and charger port circled in green

[* black] Undo the flex cables and speaker power cable circled in greenblue and lift the usb charging boardcharger port out
[* icon_caution] The flex cable for this board and the one next to it for the screen their locking tabs open from the back
[* black] Gently using a plastic opening tool lift out the bottom speaker
[* black] Also the rubber spacer circled in blue
[* black] Undo the flex cables circled in orange and slowly start pulling the old screen out

Imagem 1

Nenhuma imagem anterior

Adicionado