Skip to main content

Alterações neste passo

Edição por David Hoyt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Using a Philips screw driver, unscrew the rear keyboard screw from the bottom of the laptop.
[* black] Note: IgnoreRemove the heatsink panels from the memory and RAM panels. They DO NOT need to be removed in order to replace the logic boardheat sink with a small Phillips-head screwdriver and set them aside.
[* black] PushBe carefully with the tabs shown on both sides and the keyboard will pop upheatsink, as this can be messy if handled improperly. It is a copper heat pipe.
[* black] Note: IgnoreRemove the heatsink panels from the memory and RAM panels. They DO NOT need to be removed in order to replace the logic boardheat sink with a small Phillips-head screwdriver and set them aside.
[* black] PushBe carefully with the tabs shown on both sides and the keyboard will pop upheatsink, as this can be messy if handled improperly. It is a copper heat pipe.

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Versão Antiga

Nova Versão