Alterações no passo nº 9
Edição por Andrew Schneider —
Edição aprovada por Andrew Schneider
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Screen casing | |
| [* red] Remove the four 2.5 mm Phillips screws. | |
| - | [* black] I found that my plastic opening tool wasn't strong enough (it broke) to pry open this casing. |
| - | [* black] I used a 1.3 mm Flathead screwdriver as an opening tool. |
| [* violet] After you have gotten under the edge of the back plate, slide your tool along the length of the plate. | |
| [* icon_caution] Be careful if using a screwdriver to open the casing. While there are a minimal amount of components that can be damaged, caution should be exercised. It is not recommended. |