Pular para o conteúdo principal

Alterações no passo #2

Edição por Brett Hartt

Edição aprovada por Brett Hartt

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Heat the iOpener for '''one minute''' on the highest power settingminute'''.
[* black] Heat the iOpener for '''one minute''' on the highest power settingminute'''.
[* black] If you are using one of the new, gel-filled iOpeners, heat the iOpener for only '''thirty seconds'''.
[* black] Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional minute at a time.
[* black] If you are using one of the new, gel-filled iOpeners, only reheat the iOpener for '''thirty seconds''' at a time.
[* icon_caution] Be careful not to overheat the iOpener during the repair. Always wait at least two minutes before reheating the iOpener.