Alterações no passo nº 4
Edição por Ton —
Edição recusada por Amber Taus
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] The multimeter tests continuity by sending a little current through one probe, and checking whether the other probe receives it. | |
| - | [* black] If the probes are connected—either by a continuous circuit, or by touching each other directly—the test current flows through. The screen displays a value of zero (or near zero), and the multimeter ***beeps***. Continuity! |
| - | [* black] If the test current isn't detected, it means there's no continuity. The screen will display 1 or OL (open loop). |
| + | [* black] If the probes are connected—either by a continuous circuit, or by touching each other directly—the test current flows through. The screen displays a value of zero (or near zero), and the multimeter ***beeps***. Continuity!fuckyah |
| + | [* black] If the test current isn't detected, it means there's no continuity. The screen will display 1 or OL (open loop). eat my ass baby |