Alterações no passo nº 13
Edição por Spencer Day —
Edição aprovada por Spencer Day
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Bundled Cable Connectors | |
| - | [* black] If you see a cable made up of lots of individually wrapped wires leading into a single connector, pulling on the cable itself may be the best method. |
| - | [* black] Pull the cable away from the connector in the same direction as the individual wires are running. |
| - | [* icon_caution] Pull evenly on the full width of the cable so that no individual wires are overly strained. |
| + | [* icon_note] Bundled cable connectors have many small wires leading into them, often wrapped in a sleeve. They may not have anywhere to push with a spudger or a spot to grip with tweezers. Pulling on the cables themselves might be the only option. |
| + | [* icon_caution] This should be a last resort if the [guide|25629|sliding connector|stepid=64975|new_window=true] and [guide|25629|JST connector|stepid=370865|new_window=true] disconnection methods didn't work. |
| + | [* black] Grip all the cables at once ''as close to the connector as possible'' and pull the connector slowly and steadily out of its socket. |
| + | [* icon_note] Pull evenly on the full width of the cables so no individual wires are strained. |
| + | [* icon_reminder] To reconnect, align the connector and use a spudger or clean fingernail to push the connector head fully into the socket. |