Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #3

Edição por Philip Le Riche

Edição aprovada de Taylor Dixon

Antes
Depois
Sem alteração

Linhas de Passo

[title] Flat-Topped (Low Profile) Connectors
[* black] To disconnect flat connectors like this one, use a spudger to pry up each side. Then, lift the connector straight up from its socket.
[* icon_reminder] To reinstall, carefully position the connector, and then press it straight down until it snaps into its socket. Finger pressure is all that is required. If it won't snap home it'll be because it isn't correctly positioned. Sometimes it can take a little patience to find exactly the right position.
[* icon_reminder] To reinstall, carefully position the connector, and then press it straight down until it snaps into its socket. Finger pressure is all that is required. If it won't snap home it'll be because it isn't correctly positioned. Sometimes it can take a little patience to find exactly the right position.