Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #1

Edição por Jeff Suovanen

Edição aprovada de Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[title] ZIF Connectors
[* black] The '''zero insertion force (ZIF)''' connector often causes trouble for beginners. ZIF connectors are used to secure delicate ribbon cables, such as this trackpad cable.
[* icon_note] As the name implies, no force is needed to plug in or remove the cable.
[* black] To disconnect the cable, use the tip of a spudger or your fingernail to flip up the small retaining flap. Then, you can safely pull the ribbon cable out.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, not the connector itself.
[* icon_reminder] The white line on this ribbon cable marks the edge of the connection area. To reinstall, insert the cable into the connector up to this line, and then close the retaining flap. If the cable doesn’t insert easily up to (or very near to) this line, it’s probably misaligned and needs to be gently removed and repositioned.