Alterações no passo nº 11
Edição por Spencer Day —
Edição aprovada por Spencer Day
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] JST Connectors |
|---|---|
| + | [* icon_note] [link|https://en.wikipedia.org/wiki/JST_connector|JST connectors|new_window=true] are a type of sliding connector that usually have multiple twisted cables attached to it. They're typically on the smaller side and are often used in mice or for speakers. |
| + | [* black] To disconnect the cable, first try pushing on alternating sides of the connector, like [guide|25629|small sliding connectors|stepid=64975|new_window=true]. |
| + | [* black] If that doesn't work, use a pair of tweezers to firmly grip the sides of the connector and pull straight away from the socket. Hold the tweezers closer to the connector to get a better grip. |
| + | [* icon_note] If you're having trouble, try rocking the connector side-to-side to loosen it. |
| + | [* black] If the connector's socket has [link|https://guide-images.cdn.ifixit.com/igi/NsIsepcc2mNXwW4l.full|cutouts|new_window=true], you can insert the arms of a pair of sharp tweezers into the cutouts and gently push the connector out of its socket. |
| + | [* icon_reminder] To reconnect the cable, insert the connector into its socket and push on the edges until it's fully seated. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado