Alterações no passo nº 3
Edição por Spencer Day —
Edição aprovada por Spencer Day
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Locking Tab Connectors |
|---|---|
| + | [* icon_note] Some ribbon cable connectors have a plastic locking tab around them. These are often used in large game consoles and mice. |
| + | [* black] Use a spudger to gently push up on alternating sides of the plastic tab until it clicks up into its unlocked position. |
| + | [* icon_caution] Don't push the tab too hard or too far, otherwise it may come completely off the connector. |
| + | [* black] Once the tab is unlocked, you can gently pull the cable straight out of its socket. |
| + | [* icon_note] The cable should be able to slide in and out of the socket with little to no force. If you feel resistance, the tab may not be fully unlocked. |
| + | [* icon_reminder] During reassembly, insert the cable into its socket and use the flat end of a spudger to [link|https://guide-images.cdn.ifixit.com/igi/cZaDQHqKPKnXMXNw.full|push the tab down|new_window=true] into its locked position. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado