Ir para o conteúdo principal

Alterações no passo #1

Edição por Garrett Reed

Edição aprovada por Garrett Reed

Antes
Depois
Sem alteração

Linhas de Passo

-[* red] Using the T5 Torx screwdriver, remove the black screws on the outside of the headband. These are T5 Torx screws with a thread length of 3.5mm. There are 4 screws in total, with 2 on each side.
+[* black] Using the T5 Torx screwdriver, remove the black screws on both sides of the the outside of the headband.
+[* red] 4 (2 per side) T5 Torx screws with a thread length of 3.5mm.