Pular para o conteúdo principal

Alterações no passo #4

Edição por Lars Hedbor

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Orient the camera so the LCD screen is facing you.
[* black] Remove any tape holding it down, and then lift the LCD screen from the screen plate.
[* black] RemoveLift the hinged lip where the ribbon enters the connector. Remove the ribbon from the logic board by pulling it gently away from the logic board.
[* black] Remove any tape holding it down, and then lift the LCD screen from the screen plate.
[* black] RemoveLift the hinged lip where the ribbon enters the connector. Remove the ribbon from the logic board by pulling it gently away from the logic board.