Pular para o conteúdo principal

Alterações no passo #5

Edição por Joshua Byrne

Edição aprovada por Joshua Byrne

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] If you are replacing the hard drive with a new drive, remove the four screws that mount the 3. drive to the carrier and mount the new drive in the carrier.
[* icon_note] Important: Hold the drive by its sides. Be careful not to touch the printed circuit board on the bottom of the drive.
[* icon_note] Replacement Note: Slide the carrier and drive over the guides and into the drive bay, until you feel the drive snap into place.

Imagem 1

Nenhuma imagem anterior

Adicionado