Skip to main content

Alterações no passo #2

Edição por Jerrell

Edição aprovada by Jerrell

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Lift and remove the plastic casing.
[* icon_note] Note: It is best to lift the casing starting from the side without the protruding 3.5mm audio port and power port.
[* icon_reminder] Reminder: During this process, a rubber cover will likely be dislodged. Make sure to re-seat this cover on the small pegs before putting the plastic casing back on.
[* icon_caution] (TEAM PHOTO NOTE) make sure there is a close-up shot explaining the rubber cover part.