Pular para o conteúdo principal

Alterações neste passo

Edição por Charlene Donlon

Edição aprovada por Charlene Donlon

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] With a plastic opening tool pry off the lower case starting at the bottom edge and working around.
[* black] Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.
[* icon_caution] Remove the ribbon cables located underneath the left and right bumpers with a plastic opening tool.
[* black] Completely remove the lower case from the rest of the device.